Below you'll find two different sizes of QR Code Label Sheets that can be used with OfficerReports Tour Tracking. You will want to go to the section of the size that you want to use the link under the type of printer you'll be using to print the codes on.
Why the different sizes?
Some older phones may not be able to quickly read the smaller, 1 inch, labels. If you have a mix of older and newer devices we recommend the large, 1.5 inch, labels. In general, the larger 1.5-inch labels will scan more quickly.
LARGE (1.5 Inches)
QR Code Label Sheet Specifications (1.5 inches)
- Sheet Size: 8.5" x 11"
- Label Size: 1.5" x 1.5"
- Labels per sheet: 24
- Type: Self-Adhesive
Inkjet Printers:
https://www.onlinelabels.com/Products/OL2681WJ.htm
Laser Printers:
https://www.onlinelabels.com/Products/OL2681LP.htm
SMALL (1 Inch)
QR Code Label Sheet Specifications (1 inch):
- Sheet Size: 8.5" x 11"
- Label Size: 1" x 1"
- Labels per sheet: 80
- Type: Self-Adhesive
Inkjet Printers:
https://www.onlinelabels.com/Products/OL5425WJ.htm
Laser Printers:
https://www.onlinelabels.com/Products/OL5425LP.htm
Depending on the labels you order above select "Small" or "Large" on the Tour Stop Screen (Setup -> Sites -> Options -> Tour Stops. The ability to choose the size of the QR Code Labels that get downloaded are found in the upper right-hand corner of this page.
The labels have a water-fast coating as well as a permanent adhesive backing that prevents the label from being removed in one piece. In the harshest of environments or for additional protection, a clear topcoat spray may be applied to help protect the label. We do not recommend any particular topcoat spray, but here is an example.
Please see the instructions on how to Print your QR Codes.